Cam and Valve Train
Crower Cams & Parts
The following are all hydraulic cams
Crower 60916 (278H) Beast Cam
$ 225.00
- Adv. duration 278/289
- .050 duration 221/229
- Lobe sep. 112
- .455/.470 lift w/1.5 rocker
Crower 60919 (304H) Beast Cam
$ 225.00
- Adv. duration 304/316
- .050 duration 231/240
- Lobe sep. 112
- .470/.470 lift w/1.5 rocker
Crower 60243 (284HDP) Ultra Performance Cam
$ 225.00
- Adv. duration 284/290
- .050 duration 228/235
- Lobe sep. 112
- .479/.494 lift w/1.5 rocker
Crower 60244 (297HDP) Ultra Performance Cam
$ 225.00
- Adv. duration 297/308
- .050 duration 239/241
- Lobe sep. 112
- .500/.500 lift w/1.5 rocker
Crower 60245 (HDP) Ultra Performance Cam
$ 225.00
- Adv. duration 311/316
- .050 duration 248/253
- Lobe sep. 112
- .512/.524 lift w/1.5 rocker
The following are some of the most common Hyd. roller cams we use
Kauffman HR224
$ 475.00
- Adv. duration 278/289
- .050 duration 224/230
- Lobe sep. 112
- .502/.510 lift w/1.5 rocker
Kauffman HR230
$ 475.00
- Adv. duration 284/295
- .050 duration 230/236
- Lobe sep. 112
- .510/.520 lift w/1.5 rocker
Kauffman HR236
$ 475.00
- Adv. duration 290/301
- .050 duration 236/242
- Lobe sep. 112
- .540/.540 lift w/1.5 rocker
Kauffman HR242
$ 475.00
- Adv. duration 296/307
- .050 duration 242/248
- Lobe sep. 112
- .544/.546 lift w/1.5 rocker
Kauffman HR248
$ 475.00
- Adv. duration 302/313
- .050 duration 248/254
- Lobe sep. 112
- .548/.549 lift w/1.5 rocker
 Valves Springs
#68404 - 1.625" installed height, 1.46" dia. $ 145.00
#68405 - 1.750" installed height, 1.46" dia. $ 145.00
 Lifters
#66056 - Hyd. flat tappet lifters $ 115.00
#66963 - Solid flat tappet lifters with oil restriction $ 195.00
#66260 - Solid roller lifters (pushrod centered)with oil restriction $ 540.00
#66294 - Soild heavy duty roller lifters (pushrod centered) restricted $ 670.00
#66295 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 750.00
#66299-.903 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 945.00
#66299-.903 - Solid heavy duty roller lifters (pushrod centered) restricted $ 945.00
#66299-.937 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 945.00
#66299-.937 - Solid heavy duty roller lifters (pushrod centered) restricted $ 945.00
#72334-16 - Hyd. roller lifters $ 525.00
#ST2202-16 - Short travel hyd. roller lifters $ 825.00
Custom grinds available for all of our cams!
#51- series - Off the shelf cams (any number you want) $ 235.00
#852-16 - Hyd flat tappet lifters $ 115.00
Custom cam (hyd. or solid flat tappet) $ 255.00
Custom Hyd roller cam $ 475.00
#857-16 - Hyd roller lifters $ 645.00
Custom solid roller cam $ 475.00
#859-16 - Soild roller Lifters $ 675.00
Valve Train Parts
10 degree steel retainers $ 70.00
10 degree locks $ 30.00
Stock replacement keepers $ 8.00
Lash caps$ 48.00
10 degree Titanium retainers $ 375.00
7/16" poly locks$ 42.00
7263-16 - 9.300 5/16" Pushrods $ 135.00
7262-16 - 9.130 5/16" Pushrods $ 135.00
Custom length 5/16" chrome moly pushrod (any length in .050 increments) $ 165.00
Custom length 3/8" chrome moly pushrod (any length in .050 increments) $ 185.00
Bronze Distributor gear $ 70.00
Pro-fit PC valve seals .500 $ 24.00
Pro-fit PC valve seals .530 $ 24.00
Hardened Valve shims (.015/.030/.060 available) $ 9.00
Our aluminium valley pans come with bolts ready to install.
$ 45.00
 Our stud girdles are light weight and come with 7/16's adjusting nuts.
They are guaranteed not to break or bend under normal racing engine use. For standard D-port, E-heads and
KRE High Ports. $180.00
| D-Port heads | Edelbrock heads | High Port heads |
| |
|
|
 9 keyway billet timing chain. We have them in std., .005 & .010 under It's The Best! $ 135.00
Stock replacement cam key.
$ 2.00
Stock replacement crank key. $ 3.00
|
E-mail KRE
kre@ecr.net