KRE Logo

Cam and Valve Train

Crower Cams & Parts

The following are all hydraulic cams

Crower 60916 (278H) Beast Cam $ 115.00

Adv. duration 278/289
.050 duration 221/229
Lobe sep. 112
.455/.470 lift w/1.5 rocker

Crower 60919 (304H) Beast Cam $ 115.00

Adv. duration 304/316
.050 duration 231/240
Lobe sep. 112
.470/.470 lift w/1.5 rocker

Crower 60243 (284HDP) Ultra Performance Cam $ 135.00

Adv. duration 284/290
.050 duration 228/235
Lobe sep. 112
.479/.494 lift w/1.5 rocker

Crower 60244 (297HDP) Ultra Performance Cam $ 135.00

Adv. duration 297/308
.050 duration 239/241
Lobe sep. 112
.500/.500 lift w/1.5 rocker

Crower 60245 (HDP) Ultra Performance Cam $ 135.00

Adv. duration 311/316
.050 duration 248/253
Lobe sep. 112
.512/.524 lift w/1.5 rocker

Valves Springs

#68404 - 1.625" installed height, 1.46" dia. $ 115.00 #68405 - 1.750" installed height, 1.46" dia. $ 115.00

Lifters

#66056 - Hyd. flat tappet lifters $ 95.00

#66962 - Solid flat tappet lifters with oil restriction $ 120.00 #66260 - Solid roller lifters (pushrod centered)with oil restriction $ 350.00 #66294 - Soild heavy duty roller lifters (pushrod centered) restricted $ 455.00 #66295 - Solid heavy duty roller lifters (.180 off on int., centered exh.) restricted $ 455.00

Custom grinds available for all of our cams!

#51- series - Off the shelf cams (any number you want) $ 125.00

#852-16 - Hyd flat tappet lifters $ 80.00

Custom cam (hyd. or solid flat tappet) $ 165.00

Custom Hyd roller cam $ 315.00

#857-16 - Hyd roller lifters $ 455.00

Custom solid roller cam $ 385.00

#859-16 - Soild roller Lifters $ 460.00

Valve Train Parts

10 degree steel retainers $ 50.00
10 degree locks $ 30.00
Stock replacement keepers $ 7.00
Lash caps$ 37.00
10 degree Titanium retainers $ 180.00
7/16" poly locks$ 31.00
7263-16 - 9.300 5/16" Pushrods $ 95.00
7262-16 - 9.130 5/16" Pushrods $ 95.00
Custom length 5/16" chrome moly pushrod (any length in .050 increments) $ 135.00
Custom length 3/8" chrome moly pushrod (any length in .050 increments) $ 155.00
Bronze Distributor gear $ 55.00

Pro-fit PC valve seals .500 $ 20.00 Pro-fit PC valve seals .530 $ 20.00 Hardened Valve shims (.015/.030/.060 available) $ 7.00

We buy our valves from both Ferrea. This give us a very good selection of valves to use. All valves are one piece stainless steel. We carry a complete selection of valves.

Ferrea 5000 series replacement valves cost $ 80.00 per set of 8

F5143 - 2.11~30 seat x 5.100 F5144 - 1.77~45 seat x 5.100 F5073 - 2.11~45 seat x 5.100 F5079 - 1.66~45 seat X 5.100 F5066 - 2.11~30 seat x 5.200 F5063 - 1.77~45 seat x 5.200 F5074 - 2.11~45 seat x 5.200 F5064 - 1.66~45 seat x 5.200

Ferrea 6000 series Racing valves $ 120.00 per set of 8

F6174 - 2.11~45 seat x 5.100 F6176 - 1.77~45 seat x 5.100 F6259 - 1.66~45 seat X 5.100 F6175 - 2.11~45 seat x 5.200 F6178 - 1.77~45 seat x 5.200 F6177 - 1.66~45 seat X 5.200

Ferrea 1200 series Extreme racing valves $ 160.00 per set of 8

F1222 - 2.20~45 seat x 5.400 F1275 - 1.78~45 seat x 5.400 F1223 - 2.25~45 seat x 5.350 C1275 - 1.75~45 seat x 5.400 F1222 - 2.20~45 seat x 6.200 F1275 - 1.70~45 seat x 6.200 F1223 - 2.25~45 seat x 6.200 C1275 - 1.75~45 seat x 6.200

Our aluminium valley pans come with bolts ready to install. Alum. Valley Pan

$ 35.00

Our stud girdles are light weight and come with 7/16's adjusting nuts. They are guaranteed not to break or bend under normal racing engine use. For standard D-port, E-heads and KRE High Ports. $ 140.00

High Port heads	D-port heads	Edelbrock heads

9 keyway billet timing chain. We have them in std., .005 & .010 under It's The Best! $ 115.00

Std.	.005 under	.010 under

Cam & Crank keys Stock replacement cam key. $ 1.00

Stock replacement crank key. $ 2.00

E-mail KRE

kre@ecr.net

Call, E-mail or fax your orders!!! 740 599-5000 740 599-5550 Fax Open Mon. thur Fri. 9 to 5 unless we're racing!!

Daily UPS Shipping
Kauffman Racing Equipment 22280 Temple RD Glenmont, OH 44628