KRE Promod
KRE Alky Digger

KRE Logo


"New Products"


Tin Indian Performance aluminum 66 Tri-Power Water Neck

TIP Water neck TIP Water neck

$ 65.00
Here is an addition for the Trade Wind intake manifold from Tin Indian Performance an all aluminum 66 Water Neck. Nice little piece that gets you the clearance you need for that radiator hose and it's NOT cast iron. This piece will also fit any of the non dippled timing covers. So no need for that special cover to make these work, just bolt on and go.


Kauffman Trade Wind Dual-Four

Kauffman Trade Wind Intake Kauffman Trade Wind Intake Kauffman Trade Wind Intake
Here is the Trade Wind Dual-Four intake. Designed for inline carb's like the Edelbrock AVS series or sideways mount Holley style. Come stanard Pontiac sized ports but can be opened up to higher flowing ports up to 400 cfm. Power potential will be in the 400-900 HP range depending on port work and carbs selection.
Kauffman Trade Wind Intake as cast port - Dual-Four
$ 625.00
Kauffman Trade Wind Intake - Dual-Four with as cast port size with Tri-Power water crossover
$ 715.00
--------
Add 290 cfm match port work
$ 75.00
Add 310 cfm match port work
$ 100.00
Add 325 cfm match port work
$ 125.00
Add 340 cfm match port work
$ 125.00
Add 365 cfm match port work
$ 150.00
Add 380 cfm match port work
$ 175.00
Add 400 cfm match port work
$ 200.00


Kauffman Trade Wind Tri-Power

Kauffman Trade Wind Intake Kauffman Trade Wind Intake Kauffman Trade Wind Intake




Kauffman Trade Wind Intake Kauffman Trade Wind Intake Kauffman Trade Wind Intake

Finally a fix for that empty spot in Pontiac Tri-Power Performance. You looking for something more then the stock intake that keeps you at that 500 HP level well here it is. The answer to higher horsepower Tri-Power combos, the Trade Wind. Designed for larger ported higher flowing cylinder heads that can make up to 750 HP. As cast out of the box intake comes with standard Pontiac gasket sized ports but can be ported up to 400 CFM. First option for this intake is for Holley 2300 series 2 barrel carbs or Fitech EFI Tri-Power setup. Second option is for standard 1966 Rochester carbs for the guys that want to reuse the older stock style carbs.


Complete Tri-Power units coming soon

Kauffman Trade Wind Intake as cast port - Tri-Fi Holley 3x2
$ 625.00
Kauffman Trade Wind Intake - Tri-Fi Holley 3x2 as cast port size with Tri-Power water crossover
$ 715.00
Kauffman Trade Wind Intake as cast port - 65' Tri-Power 3x2 Rochester
$ 625.00
Kauffman Trade Wind Intake - 65' Tri-Power 3x2 as cast port size with Tri-Power water crossover
$ 715.00
Kauffman Trade Wind Intake as cast port - 66' Tri-Power 3x2 Rochester
$ 625.00
Kauffman Trade Wind Intake - 66' Tri-Power 3x2 as cast port size with Tri-Power water crossover
$ 715.00
--------
Add 290 cfm match port work
$ 75.00
Add 310 cfm match port work
$ 100.00
Add 325 cfm match port work
$ 125.00
Add 340 cfm match port work
$ 125.00
Add 365 cfm match port work
$ 150.00
Add 380 cfm match port work
$ 175.00
Add 400 cfm match port work
$ 200.00

HP crossover

$ 90.00

Here is the water crossover designed for the Trade Wind Tri-Power intake. Will fit standard Pontiac heads. This crossover retains the stock location for T-stat housing and screw in water ports.




Kauffman High Port Water Crossover

HP crossover HP crossover HP crossover

$ 90.00
Here is our newest water crossover designed only for our High Port head. This crossover will only fit the High Port head for proper alignment of the water passage to the timing cover. This crossover retains the stock location for T-stat housing and screw in water ports.




Kauffman Polar Wind

Kauffman Polar Wind Intake Kauffman Polar Wind Intake Kauffman Polar Wind Intake
Kauffman Polar Wind Intake Kauffman Polar Wind Intake

Looking for that cost effective intake for higher Horsepower combos that you don't have to spend weeks welding and grinding on, well here it is. The Kauffman Polar Wind! This Box Ram intake was built for applications that are 850HP and higher working in the 5000-8000 rpm power band. Recommended minimum head flow is 370/380 cfm. Designed for Kauffman Super Wedge and High Port heads, can work with wide port Edelbrock heads too. Only comes in 4500 series Dominator carb flange. Has outer intake manifold bolts hole moved away from ports 1/2" for larger port work. As cast ports are app. 2.400 x 1.300 in size. Dyno testing shown 10+ HP gains over BOP intake and track testing shown half a tenth gains in 8 second cars.

Kauffman Polar Wind Intake as cast port
$ 625.00
Kauffman Polar Wind Intake as cast port size with High Port water crossover
$ 710.00
--------
Add 380 cfm match port work
$ 75.00
Add 400 cfm match port work
$ 75.00
Add 430 cfm match port work
$ 100.00



Kauffman Decals

Got some larger decals made up. The medium sized one is 6 1/2" x 16" and the larger is 9" x 23". Had a fair amount of requests for some larger ones so here they are. I find some guys like to put them on there race cars or trailers.

Medium

$ 20.00

Large

$ 30.00




The following ebroidery hats are a one size fits all. The blacks one are great around the shop. Tans ones are great for clean hands only.

KRE Hats

Kauffman Black Hat $ 25.00
Kauffman Tan Hat $ 25.00








The following ebroidery black T-shirts are great work shirts. The embriodery holds up great compared to screen print shirts. It's our works shirts we use in the shop. They last forever.



KRE T-shirt

KRE Embroidery T-shirt - Medium $ 20.00
KRE Embroidery T-shirt - Large $ 20.00
KRE Embroidery T-shirt - XL $ 20.00
KRE Embroidery T-shirt - XXL $ 20.00


KRE T-shirt

Kauffman Cylinder Head Embroidery T-shirt - Medium $ 20.00
Kauffman Cylinder Head Embroidery T-shirt - Large $ 20.00
Kauffman Cylinder Head Embroidery T-shirt - XL $ 20.00
Kauffman Cylinder Head Embroidery T-shirt - XXL $ 20.00


The following black T-shirts are screen printed on the front and back. Got the Kauffman logo on front and sweet engine on the back.



KRE T-shirt

KRE Engine T-shirt - Medium $ 25.00
KRE Engine T-shirt - Large $ 25.00
KRE Engine T-shirt - XL $ 25.00
KRE Engine T-shirt - XXL $ 25.00

KRE T-shirt

KRE Engine T-shirt - XXXL $ 25.00
KRE Engine T-shirt - XXXXL $ 25.00










The following black Hoodies are screen printed on the front and back. Has the same Kauffman logo on front and sweet engine on the back. Has a front middle pocket too.



KRE T-shirt

KRE Hoodie - Medium $ 45.00
KRE Hoodie - Large $ 45.00
KRE Hoodie - XL $ 45.00
KRE Hoodie - XXL $ 45.00

KRE T-shirt









The following black Hoodies are screen printed on the front and back. Has the same Kauffman logo on front and sweet engine on the back. Has a front middle pocket too.



KRE T-shirt

KRE Sweatshirt - Medium $ 40.00
KRE Sweatshirt - Large $ 40.00
KRE Sweatshirt - XL $ 40.00



KRE T-shirt








KRE 90 Oil housingKRE oil housing

Here is our lastest part that we have been working on! This replacement filter housing is deisgned off the older 90 degree unit. With this one the filter is moved further away from the block and also located the oil filter app. 1" higher. This piece make more room vertically between the filter and headers if you have them? Made from 356-T6 alum. and has 1/8" pipe thread for oil pressure. Will fit both MR-1 and stock blocks.

KRE oil housing

$ 75.00 ea.




E-mail Kauffman
kre@kauffmanracing.com

Call, E-mail or fax your orders!!!
740 599-5000
740 599-5550 Fax
Open Mon. thur Fri. 9 to 5 unless we're racing!!

Daily UPS Shipping

Kauffman Racing Equipment
22280 Temple RD
Glenmont, OH 44628

Copyright © 1997-2024 Jeff Kauffman
Last Revision 7/17/24